×
![Modal Image]()
LP7110HC —Forklift Load Cell
2,200 lb single point load cell for hand and electric pallet trucks, quick connector, 2.0 mV/V, alloy steel, dedicated accessories.
Certifications
Ex
CPA
Overview
The LP7110HC is a 2,200 lb single point load cell built for hand pallet trucks and electric pallet trucks that weigh the load on the fork. The cell mounts in the truck frame through its two load bores, and the 5.1 x 1.5 in alloy steel body sits low enough to keep the fork profile. The quick connector is the reason this version exists: the lead detaches at the body, so a damaged cell or a cut cable is swapped at the truck instead of rewiring the whole harness, which matters on a rental fleet or a busy dock where every hour off the floor costs money. Rated output is 2.0 ± 0.1 mV/V, total error and 30 minute creep are both ±0.02% F.S., input resistance is 400 ±10 ohm and output resistance 351 ±2 ohm. The cell runs on 4-12 VDC recommended with 15 VDC maximum, takes 150% F.S. safe and 200% F.S. destructive load, and operates from -22 F to 158 F. It ships with dedicated accessories for pallet truck installation, so the fitter has the parts on hand instead of sourcing them locally. Wiring is red Exc+, green Sig+, black Exc-, white Sig- and yellow shield.Specifications
| Specification | Value |
|---|---|
| Application | Single point load cell for hand and electric pallet trucks |
| Rated capacity | 2,200 lb (1 t) |
| Rated output | 2.0 ± 0.1 mV/V |
| Total error | ±0.02% F.S. |
| Creep (30 min) | ±0.02% F.S. |
| Input / output resistance | 400 ±10 ohm / 351 ±2 ohm |
| Excitation | 4-12 VDC recommended, 15 VDC max |
| Safe / destructive overload | 150% F.S. / 200% F.S. |
| Operating range | -22 to 158 F |
| Body size | 5.1 x 1.5 in |
| Mounting holes | 2 x 0.53 in, 3.0 in spacing |
| Load bore | Ø0.79 in |
| Connector | Quick release plug, 1.2 in |
| Construction | Alloy steel, stainless steel cover |
| Wiring | Red Exc+, Green Sig+, Black Exc-, White Sig-, Yellow shield |
| Accessories | Dedicated pallet truck installation kit supplied |
Features
Quick Connector
The lead unplugs at the body, so a failed cell or a cut cable is replaced on the truck without rewiring the harness.
Built for Pallet Trucks
A 5.1 x 1.5 in alloy steel body and two 0.79 in load bores fit hand and electric pallet truck frames.
±0.02% Total Error
Total error and 30 minute creep both hold at ±0.02% F.S., so fork weighing stays accurate through a full shift.
Dedicated Accessories
The cell ships with its own pallet truck accessories, so the installer is not hunting brackets and bolts on site.
Applications
Hand Pallet Trucks
Electric Pallet Trucks
Pallet Truck Scales
Forklift Weighing
Warehousing
Logistics and Distribution
Food and Beverage Plants
Manufacturing Plants
Rental Fleets
OEM Pallet Trucks
Downloads & Documentation
PDF
Download 
Need LP7110HC for your application?
Tell us your capacity, accuracy class, and environment — our engineers will confirm fit and check live inventory.